Xhost usage in AIX

November 20, 2014, 5:27 am

Hi

Can some one please advise on the usage of xhost command in aix.

The AIX server name is pmut3.

The below is the requirement :

Only allow X11 / X-Window connections to the pmut3 server from the following windows hosts:

Citrix Session Host server SRV090
Citrix Session Host server SRV091

The below is the status of my aix server :

Code:

pmut3:/> cat /etc/ssh/sshd_config | grep -i X11                                                        

X11Forwarding yes 

#X11DisplayOffset 10

X11UseLocalhost yes

#       X11Forwarding no



=======================================================

Below are the commands I have given :





pmut3:/> export DISPLAY=localhost:10.0                                                                 

pmut3:/> xhost +srv090                                                                                 

1356-200 xhost unable to open display "localhost:10.0"



===========================================================

Please advise me on this.

↧

Validate numerical

November 20, 2014, 6:47 am

≫ Next: Find and rm files with spaces in the name

≪ Previous: Xhost usage in AIX

friends that way I can validate that the value is numeric taken

instance

var = 12re

if var = numeric then a
echo "Numerical
else
echo "not mumerico"
fi

↧

Find and rm files with spaces in the name

November 20, 2014, 9:03 am

≫ Next: Creating AIX LV VG and JFS2 issues?

≪ Previous: Validate numerical

I'm sure this has been answered before, but my searches have not turned up the right solution. :confused:

I need to remove files in a directory, without descending into subdirectories, older than n days. Some of the filenames contain spaces or other special characters:

Code:

E10403 (2)

E20402 (2)

W50301 (2)

Shortcut to enew1.lnk

So far all variations of find I've tried result in The parameter list is too long (e.g. find * -prune -type f -mtime +30).

Suggestions or links to solutions would be much appreciated. :)

TIA
Lee Carlson (aka PapaLee)

↧

Creating AIX LV VG and JFS2 issues?

November 20, 2014, 2:20 pm

≫ Next: How to take the vg data back?

≪ Previous: Find and rm files with spaces in the name

Can someone please help me understand what it is I am doing incorrectly?

I have 22 PVs (disks) assigned to a VG, the stats on the disks:

Code:

# lspv hdisk1

PHYSICAL VOLUME:    hdisk1                   VOLUME GROUP:     vg_usr1

PV IDENTIFIER:      0000150179158027 VG IDENTIFIER     000015010000d60000000149c                                                                                                                               f0a568a

PV STATE:           active

STALE PARTITIONS:   0                        ALLOCATABLE:      yes

PP SIZE:            128 megabyte(s)          LOGICAL VOLUMES:  1

TOTAL PPs:          546 (69888 megabytes)    VG DESCRIPTORS:   1

FREE PPs:           0 (0 megabytes)          HOT SPARE:        no

USED PPs:           546 (69888 megabytes)    MAX REQUEST:      256 kilobytes

FREE DISTRIBUTION:  00..00..00..00..00

USED DISTRIBUTION:  110..109..109..109..109

MIRROR POOL:        None

I have a VG created..

Code:

# lsvg vg_usr1

VOLUME GROUP:       vg_usr1                  VG IDENTIFIER:  000015010000d60000000149cf0a568a

VG STATE:           active                   PP SIZE:        128 megabyte(s)

VG PERMISSION:      read/write               TOTAL PPs:      12012 (1537536 megabytes)

MAX LVs:            256                      FREE PPs:       2 (256 megabytes)

LVs:                1                        USED PPs:       12010 (1537280 megabytes)

OPEN LVs:           0                        QUORUM:         12 (Enabled)

TOTAL PVs:          22                       VG DESCRIPTORS: 22

STALE PVs:          0                        STALE PPs:      0

ACTIVE PVs:         22                       AUTO ON:        yes

MAX PPs per VG:     32512

MAX PPs per PV:     1016                     MAX PVs:        32

LTG size (Dynamic): 256 kilobyte(s)          AUTO SYNC:      no

HOT SPARE:          no                       BB POLICY:      relocatable

PV RESTRICTION:     none                     INFINITE RETRY: no

DISK BLOCK SIZE:    512

I have a LV created..

Code:

# lslv lv_usr1

LOGICAL VOLUME:     lv_usr1                VOLUME GROUP:   vg_usr1

LV IDENTIFIER:      000015010000d60000000149cf0a568a.1 PERMISSION:     read/write

VG STATE:           active/complete        LV STATE:       closed/syncd

TYPE:               jfs2                   WRITE VERIFY:   off

MAX LPs:            32512                  PP SIZE:        128 megabyte(s)

COPIES:             2                      SCHED POLICY:   parallel

LPs:                6005                   PPs:            12010

STALE PPs:          0                      BB POLICY:      relocatable

INTER-POLICY:       minimum                RELOCATABLE:    yes

INTRA-POLICY:       middle                 UPPER BOUND:    32

MOUNT POINT:        N/A                    LABEL:          usr1

MIRROR WRITE CONSISTENCY: on/ACTIVE

EACH LP COPY ON A SEPARATE PV ?: yes

Serialize IO ?:     NO

INFINITE RETRY:     no

I created a mirrored LV (Copies: 2), so next I want to create the JFS2 FS..

Code:

  Volume group name                                   vg_usr1

  SIZE of file system

          Unit Size                                   Megabytes

*         Number of units                            [768000]

* MOUNT POINT                                        [/usr1]

  Mount AUTOMATICALLY at system restart?              yes

  PERMISSIONS                                         read/write

  Mount OPTIONS                                      []

  Block Size (bytes)                                  4096

  Logical Volume for Log

  Inline Log size (MBytes)                           []

  Extended Attribute Format

  ENABLE Quota Management?                            no

  Enable EFS?                                         no

  Allow internal snapshots?                           no

  Mount GROUP                                        []

The error I get is..

Code:

Command: failed        stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

0516-404 allocp: This system cannot fulfill the allocation request.

        There are not enough free partitions or not enough physical volumes

        to keep strictness and satisfy allocation requests.  The command

        should be retried with different allocation characteristics.

0516-822 mklv: Unable to create logical volume.

crfs: 0506-972 Cannot create logical volume for file system.

rmlv: Logical volume loglv00 is removed.

I have no idea what I am doing wrong? I am trying to maximize my usage of PP/LPs, so basically use it all up and assign the largest possible FS on the JFS2.

When creating the JFS2 FS, its asking for the Number of Units so if my LV has 6005 LPs, and my PP size is 128, 6005x128 .. 768640MB.. to leave a bit of breathing room I tried to set it to 768000 but the above error happens.

What am i doing wrong.. really would like to understand how to do this correctly starting from the PPs up to creating the JFS2.

Thank you for your help.

↧

How to take the vg data back?

November 24, 2014, 1:31 am

≫ Next: Cron job - Need to run Cron every quarter at particular time

≪ Previous: Creating AIX LV VG and JFS2 issues?

Hi

I would like to take back the data from datavg ( 4 lv : fslv00, fslv01, tuxedo_lv and oracle_lv ), but I don't know what to do :(:(:(.

Code:

lsvg -l datavg

datavg:

LV NAME             TYPE       LPs     PPs     PVs  LV STATE      MOUNT POINT

loglv00             jfslog     1       1       1    closed/syncd  N/A

fslv00              jfs2       400     400     2    closed/syncd  /export/spot6166

fslv01              jfs2       240     240     2    closed/syncd  /u01

tuxedo_lv           jfs2       20      20      1    closed/syncd  N/A

loglv01             jfs2log    1       1       1    closed/syncd  N/A

oracle_lv           jfs2       28      28      1    closed/syncd  N/A

Code:

test02:/]mount /u01

mount: 0506-323 Cannot get information about log device /dev/loglv03.



test02:/]mount /export/spot6166

Replaying log for /dev/fslv00.

mount: 0506-324 Cannot mount /dev/fslv00 on /export/spot6166: The media is not formatted or the format is not correct.

Code:

test02:/]df -g

Filesystem    GB blocks      Free %Used    Iused %Iused Mounted on

/dev/hd4           2.00      0.43   79%    16222    14% /

/dev/hd2           7.00      1.21   83%    62904    18% /usr

/dev/hd9var        1.00      0.79   21%     6700     4% /var

/dev/hd3           7.00      3.68   48%     5421     1% /tmp

/dev/hd1           1.00      0.77   23%     2705     2% /home

/dev/hd11admin      0.50      0.50    1%        5     1% /admin

/proc                 -         -    -         -     -  /proc

/dev/hd10opt       4.00      0.98   76%     4996     3% /opt

/dev/livedump      0.25      0.25    1%        4     1% /var/adm/ras/livedump

↧

Cron job - Need to run Cron every quarter at particular time

November 25, 2014, 7:53 am

≫ Next: Python on AIX-Need urgent Help

≪ Previous: How to take the vg data back?

Hi,

1)
If some job supposed to run on 1st of every month at 7 AM
In cron job when we have a blackout on the 1st ( i.e when 1st falls on a sunday ) how can we make the job run the next business day?

2) How can we run a job on 25th of every quarter 7 AM(jan,apr,jul,oct)
And if 25th falls on Sunday, how can we make it work next business day.

Thank you,

↧

Python on AIX-Need urgent Help

November 28, 2014, 12:49 am

≫ Next: AIX errpt

≪ Previous: Cron job - Need to run Cron every quarter at particular time

Hi Experts,

I am new to python and AIX. I am trying to install Python 2.7 or python 3.2 on AIX 7.1 but getting the bellow error. could you please let me know how to resolve this.

Note: Same has been installed on Linux Redhat successfully.

Code:

$ ./configure --enable-shared



## --------- ##

## Platform. ##

## --------- ##



hostname = SGTEST

uname -m = 000501D2D700

uname -r = 1

uname -s = AIX

uname -v = 7



/usr/bin/uname -p = powerpc

/bin/uname -X = unknown



/bin/arch = unknown

/usr/bin/arch -k = unknown

/usr/convex/getsysinfo = unknown

/usr/bin/hostinfo = unknown

/bin/machine = unknown

/usr/bin/oslevel = 7.1.0.0

/bin/universe = unknown



PATH: /usr/bin

PATH: /usr/vacpp/bin





## ----------- ##

## Core tests. ##

## ----------- ##



configure:2790: checking build system type

configure:2804: result: powerpc-ibm-aix7.1.0.0

configure:2824: checking host system type

configure:2837: result: powerpc-ibm-aix7.1.0.0

configure:2945: checking for --enable-universalsdk

configure:2986: result: no

configure:2996: checking for --with-universal-archs

configure:3013: result: 32-bit

configure:3170: checking MACHDEP

configure:3362: result: aix7

configure:3368: checking EXTRAPLATDIR

configure:3383: result:

configure:3404: checking for --without-gcc

configure:3448: result:

configure:3542: checking for gcc

configure:3569: result: gcc

configure:3798: checking for C compiler version

configure:3807: gcc --version >&5

./configure[3809]: gcc: not found

configure:3818: $? = 127

configure:3807: gcc -v >&5

./configure[3809]: gcc: not found

configure:3818: $? = 127

configure:3807: gcc -V >&5

./configure[3809]: gcc: not found

configure:3818: $? = 127

configure:3807: gcc -qversion >&5

./configure[3809]: gcc: not found

configure:3818: $? = 127

configure:3838: checking whether the C compiler works

configure:3860: gcc conftest.c >&5

./configure[3862]: gcc: not found

configure:3864: $? = 127

configure:3902: result: no

configure: failed program was:

| /* confdefs.h */

| #define _GNU_SOURCE 1

| #define _NETBSD_SOURCE 1

| #define __BSD_VISIBLE 1

| #define _BSD_TYPES 1

| #define _DARWIN_C_SOURCE 1

| #define _XOPEN_SOURCE 600

| #define _XOPEN_SOURCE_EXTENDED 1

| #define _POSIX_C_SOURCE 200112L

| /* end confdefs.h. */

|

| int

| main ()

| {

|

| ;

| return 0;

| }

configure:3907: error: in `/usr/sap/SHT/Python-2.7.8':

configure:3909: error: C compiler cannot create executables

See `config.log' for more details



## ---------------- ##

## Cache variables. ##

## ---------------- ##



ac_cv_build=powerpc-ibm-aix7.1.0.0

ac_cv_env_CC_set=set

ac_cv_env_CC_value=gcc

ac_cv_env_CFLAGS_set=''

ac_cv_env_CFLAGS_value=''

ac_cv_env_CPPFLAGS_set=''

ac_cv_env_CPPFLAGS_value=''

ac_cv_env_CPP_set=''

ac_cv_env_CPP_value=''

ac_cv_env_LDFLAGS_set=''

ac_cv_env_LDFLAGS_value=''

ac_cv_env_LIBS_set=''

ac_cv_env_LIBS_value=''

ac_cv_env_build_alias_set=''

ac_cv_env_build_alias_value=''

ac_cv_env_host_alias_set=''

ac_cv_env_host_alias_value=''

ac_cv_env_target_alias_set=''

ac_cv_env_target_alias_value=''

ac_cv_host=powerpc-ibm-aix7.1.0.0

ac_cv_prog_ac_ct_CC=gcc



## ----------------- ##

## Output variables. ##

## ----------------- ##



AR=''

ARCH_RUN_32BIT=''

ARFLAGS=''

BASECFLAGS=''

BASECPPFLAGS=''

BLDLIBRARY=''

BLDSHARED=''

BUILDEXEEXT=''

CC='gcc'

CCSHARED=''

CFLAGS=''

CFLAGSFORSHARED=''

CONFIGURE_MACOSX_DEPLOYMENT_TARGET=''

CONFIG_ARGS=' '\''--enable-shared'\'' '\''CC=gcc'\'''

CPP=''

CPPFLAGS=''

CXX=''

DEFS=''

DLINCLDIR=''

DLLLIBRARY=''

DYNLOADFILE=''

ECHO_C='\c'

ECHO_N=''

ECHO_T=''

EGREP=''

EXEEXT=''

EXPORT_MACOSX_DEPLOYMENT_TARGET='#'

EXTRAMACHDEPPATH=''

EXTRAPLATDIR=''

FRAMEWORKALTINSTALLFIRST=''

FRAMEWORKALTINSTALLLAST=''

FRAMEWORKINSTALLAPPSPREFIX=''

FRAMEWORKINSTALLFIRST=''

FRAMEWORKINSTALLLAST=''

FRAMEWORKUNIXTOOLSPREFIX='/usr/local'

GNULD=''

GREP=''

HAS_HG=''

HAVE_GETHOSTBYNAME=''

HAVE_GETHOSTBYNAME_R=''

HAVE_GETHOSTBYNAME_R_3_ARG=''

HAVE_GETHOSTBYNAME_R_5_ARG=''

HAVE_GETHOSTBYNAME_R_6_ARG=''

HGBRANCH=''

HGTAG=''

HGVERSION=''

INSTALL_DATA=''

INSTALL_PROGRAM=''

INSTALL_SCRIPT=''

INSTSONAME=''

LDCXXSHARED=''

LDFLAGS=''

LDLAST=''

LDLIBRARY=''

LDLIBRARYDIR=''

LDSHARED=''

LIBC=''

LIBFFI_INCLUDEDIR=''

LIBM=''

LIBOBJS=''

LIBRARY=''

LIBS=''

LIBTOOL_CRUFT=''

LINKCC=''

LINKFORSHARED=''

LIPO_32BIT_FLAGS=''

LN=''

LTLIBOBJS=''

MACHDEP='aix7'

MACHDEP_OBJS=''

MAINCC=''

MKDIR_P=''

MULTIARCH=''

OBJEXT=''

OPT='-O2'

OTHER_LIBTOOL_OPT=''

PACKAGE_BUGREPORT='http://bugs.python.org/'

PACKAGE_NAME='python'

PACKAGE_STRING='python 2.7'

PACKAGE_TARNAME='python'

PACKAGE_URL=''

PACKAGE_VERSION='2.7'

PATH_SEPARATOR=':'

PKG_CONFIG=''

PYTHONFRAMEWORK=''

PYTHONFRAMEWORKDIR='no-framework'

PYTHONFRAMEWORKIDENTIFIER='org.python.python'

PYTHONFRAMEWORKINSTALLDIR=''

PYTHONFRAMEWORKPREFIX=''

PYTHON_FOR_BUILD='./$(BUILDPYTHON) -E'

RANLIB=''

RUNSHARED=''

SGI_ABI=''

SHELL='/bin/sh'

SHLIBS=''

SIGNAL_OBJS=''

SO=''

SOVERSION='1.0'

SRCDIRS=''

SVNVERSION=''

TCLTK_INCLUDES=''

TCLTK_LIBS=''

THREADHEADERS=''

THREADOBJ=''

TRUE=''

UNICODE_OBJS=''

UNIVERSALSDK=''

UNIVERSAL_ARCH_FLAGS=''

USE_SIGNAL_MODULE=''

USE_THREAD_MODULE=''

VERSION='2.7'

_PYTHON_HOST_PLATFORM=''

ac_ct_AR=''

ac_ct_CC='gcc'

ac_ct_CXX=''

bindir='${exec_prefix}/bin'

build='powerpc-ibm-aix7.1.0.0'

build_alias=''

build_cpu='powerpc'

build_os='aix7.1.0.0'

build_vendor='ibm'

datadir='${datarootdir}'

datarootdir='${prefix}/share'

docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'

dvidir='${docdir}'

exec_prefix='NONE'

host='powerpc-ibm-aix7.1.0.0'

host_alias=''

host_cpu='powerpc'

host_os='aix7.1.0.0'

host_vendor='ibm'

htmldir='${docdir}'

includedir='${prefix}/include'

infodir='${datarootdir}/info'

libdir='${exec_prefix}/lib'

libexecdir='${exec_prefix}/libexec'

localedir='${datarootdir}/locale'

localstatedir='${prefix}/var'

mandir='${datarootdir}/man'

oldincludedir='/usr/include'

pdfdir='${docdir}'

prefix='NONE'

program_transform_name='s,x,x,'

psdir='${docdir}'

sbindir='${exec_prefix}/sbin'

sharedstatedir='${prefix}/com'

sysconfdir='${prefix}/etc'

target_alias=''



## ----------- ##

## confdefs.h. ##

## ----------- ##



/* confdefs.h */

#define _GNU_SOURCE 1

#define _NETBSD_SOURCE 1

#define __BSD_VISIBLE 1

#define _BSD_TYPES 1

#define _DARWIN_C_SOURCE 1

#define _XOPEN_SOURCE 600

#define _XOPEN_SOURCE_EXTENDED 1

#define _POSIX_C_SOURCE 200112L



configure: exit 77

Thanks and regards,
Tamil

Moderator's Comments:

Please use code tags next time for your code and data. Thanks

↧

AIX errpt

November 28, 2014, 7:07 am

≫ Next: RCP slow down and blocks login, telnet, rsh, etc on target server

≪ Previous: Python on AIX-Need urgent Help

Hi,

just a short question:

Is a error label always equal to a error identifier?
So it does not matter if i search for an specific identifier (errpt -j) or a specific label (errpt -J)?

Regards
Ron

↧

RCP slow down and blocks login, telnet, rsh, etc on target server

November 30, 2014, 5:16 pm

≫ Next: Ssh keys on floating ip address

≪ Previous: AIX errpt

Hello I have a LPAR AIX 6.1 on Power VM, Vio 2.2.3 and when I execute a rcp to this machine, I cant, simultaneosly, rlogin, telnet, rsh to this same LPARt. This commands stay hanged till the copy end, and Imeddiatlely the comand is executed (rlogin, telnet, rhs, etc).

Someone can give me a direction ?

Best Regards.
Artur

↧

Ssh keys on floating ip address

December 1, 2014, 1:30 am

≫ Next: Unable to create a SPOT

≪ Previous: RCP slow down and blocks login, telnet, rsh, etc on target server

hello, i have two AIX6.1 machines. one of them is the "live" server that the users are connected to in order to do their job and the second is acting as a backup server just in case that there is some problem with the "live" one. i noticed that when i de-activate the resources from the one server and activate them on the backup server i have a problem with ssh keys because i have to remove the entry of the server from known_hosts file and authenticate the connection again. in known_hosts file i have the keys for the physical name of the 2 servers (ex. server1, server2) and also the key for the floating ip address (ex. server_float). when i switch applications from one server to another i have to remove the entry for server_float and re-authenticate the connection so that a new entry will be added. is there a way to have an entry or 2 in my known_hosts file that will accept connections from either server (server1, server2) without needing to remove the entry and add it again? Thank you

↧

Unable to create a SPOT

December 1, 2014, 10:12 am

≫ Next: AIX: two strange process[SOLVED]

≪ Previous: Ssh keys on floating ip address

Hi everyone!

Ok so I'm trying for the first time to install AIX on a LPAR with NIM.

The NIM:

Code:

root@oaexpnimp01(/home/root) # oslevel -s

6100-08-02-1316

I'm trying to install AIX 6.1 TL1. I successfully created a new lpp source

Code:

root@oaexpnimp01(/home/root) # lsnim -l AIX61_TL1_2

AIX61_TL1_2:

   class       = resources

   type        = lpp_source

   arch        = power

   Rstate      = ready for use

   prev_state  = unavailable for use

   location    = /nim/lppsource/AIX61_TL1_2

   simages     = yes

   alloc_count = 0

   server      = master

Now I'm trying to create the SPOT

Code:

root@oaexpnimp01(/home/root) # nim -o define -t spot -a server=master -a location=/nim/spot -a source=AIX61_TL1_2  spot-LPP_AIX61_TL1_2



 Creating SPOT in "/nim/spot" on machine "master" from "AIX61_TL1_2" ...



 Restoring files from BOS image.  This may take several minutes ...





 Checking filesets and network boot images for SPOT "spot-LPP_AIX61_TL1_2".

 This may take several minutes ...



warning: 0042-001 m_mkspot: processing error encountered on "master":

   0042-175 c_ch_nfsexp: An unexpected result was returned by the

        "/usr/sbin/exportfs" command:

        exportfs: 1831-186 /nim/lppsource/AIX61_TL1_2 not found in /etc/exports





rc=0

warning: 0042-001 m_instspot: processing error encountered on "master":

   0042-175 c_ch_nfsexp: An unexpected result was returned by the

        "/usr/sbin/exportfs" command:

        exportfs: 1831-186 /nim/lppsource/AIX61_TL1_2 not found in /etc/exports





rc=0

warning: 0042-001 m_instspot: processing error encountered on "master":

   0042-062 m_ckspot: "spot-LPP_AIX61_TL1_2" is missing something which is

        required

It said it failed but when i look it up, it exists with an error:

Code:

root@oaexpnimp01(/home/root) # lsnim -l spot-LPP_AIX61_TL1_2

spot-LPP_AIX61_TL1_2:

   class         = resources

   type          = spot

   arch          = power

   Rstate        = information is missing from this object's definition

   prev_state    = verification is being performed

   info          = warning: 0042-157 c_ckspot: unable to access the "/nim/spot/spot-LPP_AIX61_TL1_2/usr/./lpp/bosinst/image.template" file

   location      = /nim/spot/spot-LPP_AIX61_TL1_2/usr

   version       = 6

   release       = 1

   mod           = 1

   oslevel_r     = 6100-01

   alloc_count   = 0

   server        = master

   Rstate_result = success

   mk_netboot    = yes

   missing       = "network boot image"

   missing       = bos.64bit

   missing       = bos.diag

   missing       = bos.mp64

   missing       = bos.net.nfs.client

   missing       = bos.net.tcp.client

   missing       = bos.net.tcp.smit

   missing       = bos.sysmgt.nim.client

   missing       = bos.sysmgt.nim.spot

   missing       = bos.sysmgt.serv_aid

   missing       = bos.sysmgt.smit

   missing       = bos.sysmgt.sysbr

   missing       = bos.terminfo

   missing       = bos.wpars

   missing       = mcr.rte

I know the error message is quite explicit, but when I look at my exported file, everything is there:

Code:

root@oaexpnimp01(/home/root) # exportfs

/nim/VIOS        -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottvio1:oaexpviop01:oaexpviop02

/opera/scripts   -sec=sys:krb5p:krb5i:krb5:dh,rw

/nim/HMC         -vers=3,sec=sys:krb5p:krb5i:krb5:dh,access=otthmc1,root=otthmc1

/opera/nimfs     -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottwaspsp:ottland1:ottutil:ottwas1:ottfircoqa:oaexpswpp01:ottdb1:oadejlandt01:oaexpnimp01:oaexpaix06:ottapps:oaexpsaap01:oaexpfffp01:oablcsaap01:oadejsaap01:oadejmqmdt01:oablclanp01:oadejlanp01:oahedwasp01:oablcsaat1:oadejmqmp01:otticdqa:oamcbappp01:oldejwasdt01:oldejdb2dt01:oldejwasp01:oldejdb2p01:oaacpwasp01:olicdlanp01:olsncwasp01:olsncdb2p01

/nim/mksysb      -vers=2:3,sec=sys:krb5p:krb5i:krb5:dh,root=ottwaspsp:ottland1:ottutil:ottwas1:ottfircoqa:oaexpswpp01:ottvio1:oaexpviop01:oaexpviop02:ottdb1:oaexpfffp01:oadejlandt01:oaexpnimp01:oaexpaix06:ottapps:oaexpsaap01:oablcsaap01:oadejsaap01:oadejmqmdt01:oablclanp01:oadejlanp01:oahedwasp01:oablcsaat1:oadejmqmp01:oamcbappp01:oaacpwasp01

/opera/logiciels -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=olicdlanp01:olsncwasp01:olsncdb2p01:olexpwpsr01

/nim/lppsource   -vers=2:3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottland1:oaexpnimp01

root@oaexpnimp01(/home/root) # exportfs -ua

root@oaexpnimp01(/home/root) # exportfs

exportfs: 1831-182 nothing exported

root@oaexpnimp01(/home/root) # exportfs -a

root@oaexpnimp01(/home/root) # exportfs

/nim/VIOS        -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottvio1:oaexpviop01:oaexpviop02

/opera/scripts   -sec=sys:krb5p:krb5i:krb5:dh,rw

/nim/HMC         -vers=3,sec=sys:krb5p:krb5i:krb5:dh,access=otthmc1,root=otthmc1

/opera/nimfs     -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottwaspsp:ottland1:ottutil:ottwas1:ottfircoqa:oaexpswpp01:ottdb1:oadejlandt01:oaexpnimp01:oaexpaix06:ottapps:oaexpsaap01:oaexpfffp01:oablcsaap01:oadejsaap01:oadejmqmdt01:oablclanp01:oadejlanp01:oahedwasp01:oablcsaat1:oadejmqmp01:otticdqa:oamcbappp01:oldejwasdt01:oldejdb2dt01:oldejwasp01:oldejdb2p01:oaacpwasp01:olicdlanp01:olsncwasp01:olsncdb2p01

/nim/mksysb      -vers=2:3,sec=sys:krb5p:krb5i:krb5:dh,root=ottwaspsp:ottland1:ottutil:ottwas1:ottfircoqa:oaexpswpp01:ottvio1:oaexpviop01:oaexpviop02:ottdb1:oaexpfffp01:oadejlandt01:oaexpnimp01:oaexpaix06:ottapps:oaexpsaap01:oablcsaap01:oadejsaap01:oadejmqmdt01:oablclanp01:oadejlanp01:oahedwasp01:oablcsaat1:oadejmqmp01:oamcbappp01:oaacpwasp01

/opera/logiciels -vers=3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=olicdlanp01:olsncwasp01:olsncdb2p01:olexpwpsr01

/nim/lppsource   -vers=2:3,sec=sys:krb5p:krb5i:krb5:dh,rw,root=ottland1:oaexpnimp01

When i try to recreate the SPOT after unexporting the FS and re-export them, the still occurs. Anyone has an idea for me?

I'm still new AIX installation :)

Regards,
Trivium012

↧

AIX: two strange process[SOLVED]

December 3, 2014, 8:54 am

≫ Next: Useful and nice script for AIX,but outdated[SOLVED]

≪ Previous: Unable to create a SPOT

I check for top 10 cpu consumer

Code:

ps auxww |head -10

USER          PID %CPU %MEM   SZ  RSS    TTY STAT    STIME  TIME COMMAND

root       131076 23,6  0,0  448  448      - A    16:00:59 50:21 wait

root       983070 21,9  0,0  448  448      - A    16:00:59 46:43 wait

I try to kill them

Code:

sudo kill 131076

kill: 131076: 0509-015 Il processo specificato non esiste.

Another strange thing

Code:

ps -elf|grep wait

return 0

I don't understand from where those process came from..

---------- Post updated at 11:54 AM ---------- Previous update was at 11:50 AM ----------

Found solution

http://www.unix.com/aix/216659-wait-...lding-cpu.html

↧

Useful and nice script for AIX,but outdated[SOLVED]

December 3, 2014, 12:40 pm

≫ Next: Comparing two tar files on AIX

≪ Previous: AIX: two strange process[SOLVED]

How can I quickly see disk usage for my entire system? - IBM: AIX FAQ - Tek-Tips

I tried it on aix7.1with

Code:

./script -d

and give me

Code:

VG          PV       size  used  free   location       Description

rootvg                 128   397   149              

rootvg                 128   212   334              

myvg                   256   201   345

Location, PV are empty,someone know how to fix for new aix?
Thanks

edit:forget,works perfect,was my mistake

↧

Comparing two tar files on AIX

December 4, 2014, 12:04 am

≫ Next: Unable to delete files

≪ Previous: Useful and nice script for AIX,but outdated[SOLVED]

Hello,

I have a directory which suddenly got filled up 100% from 70% ; (this is an oracle directory which has application and database in it ORACLE EBS)

I do make cold backups, last month when I made cold backup of the directory /oratec the tar zip file was 31GB and this month when i made the backup it was 42GB

an increase of 10GB in the zip/tar compressed file.

How can I find by comparing the two tar files which file or folder has

changed in size
size of all the folders
size of large files

thanks

↧

Unable to delete files

December 4, 2014, 3:25 am

≫ Next: Doubt on NMON - disable detailed disk statistics

≪ Previous: Comparing two tar files on AIX

Code:

heapdump716960.1416296627.txt  

heapdump716960.1416299494.txt    

heapdump716960.1416302375.txt   



trying to delete the above files



root@atec:/oratec/prodcomn/temp>rm heap*.*.txt

ksh: /usr/bin/rm: 0403-027 The parameter list is too long.



root@atec:/oratec/prodcomn/temp>rm heap*.txt

ksh: /usr/bin/rm: 0403-027 The parameter list is too long.



root@atec:/oratec/prodcomn/temp>rm heap*

ksh: /usr/bin/rm: 0403-027 The parameter list is too long.

root@atec:/oratec/prodcomn/temp>

↧

Doubt on NMON - disable detailed disk statistics

December 11, 2014, 4:46 am

≫ Next: AIX 4.3 ISO download link require

≪ Previous: Unable to delete files

Hi All,

The NMON file is getting generated with file size of more than 70MB for just 40 minute duration on AIX 6.1 box, due to more number of disks (Disk0, Disk1, Disk22).
With respect to disk related details, I need to have only the disk summary, and disable the detailed disk statistics (tabs getting created for each of these metrics for 23 individual disks : DISKBUSY, DISKBSIZE, DISKXFER, DISKRXFER, DISKREAD, DISKWRITE, DISKWIO, DISKRIO, DISKAVGWIO, DISKAVGRIO, Etc), to reduce the nmon file size.
Can anyone please share me the nmon command for this !?

Thanks,
Raja

↧

AIX 4.3 ISO download link require

December 11, 2014, 5:11 am

≫ Next: Issue while importing Oracle Dump File on AIX 5.3

≪ Previous: Doubt on NMON - disable detailed disk statistics

i need to download 4.3 ISO because my server rs6000 no display and i want to install on ther intel server to get data

Also, help me installed cobol database on aix server can work on sco cobol ?

↧

Issue while importing Oracle Dump File on AIX 5.3

December 26, 2014, 5:36 am

≫ Next: AIX Syslog where the hostname sit

≪ Previous: AIX 4.3 ISO download link require

Hi All,

I am facing one problem related to importing Oracle Dump file.
We have two different version of AIX boxes with oracle (version 10.2.0.4.0) installed.
On one AIX box (version 6.1) we are creating oracle dump file (*.dmp) using oracle exp utility and importing it onto another AIX box (version 5.3) using
imp utility of oracle .

We are getting below error :

Code:

25 Dec 22:13 IMP-00010: not a valid export file, header failed verification

25 Dec 22:13 IMP-00000: Import terminated unsuccessfully

Any pointer would be highly appreciated.

Thanks & Regards
Gunjan.

↧

AIX Syslog where the hostname sit

February 6, 2017, 12:15 am

≫ Next: AIX native SNMP producing limited results when walking MIB tree

≪ Previous: Issue while importing Oracle Dump File on AIX 5.3

Dear all experts,
I would like to know where can I find the hostname located as when I receive the syslog, I can only see as below : (showing in localhost instead of the hostname)

Code:

Feb  6 15:31:31 localhost syslog:info syslogd: restart

Feb  6 15:31:50 localhost syslog:info syslogd: restart

Feb  6 15:36:06 localhost daemon:info xntpd[3604704]: synchronized to LOCAL(0), stratum=3

Feb  6 15:42:01 localhost syslog:info syslogd: restart

I have checked /etc/hosts, hostname has stated correctly with correct IP.

↧

AIX native SNMP producing limited results when walking MIB tree

May 9, 2017, 10:42 am

≫ Next: IBM AIX 5.2 cloning Hdds

≪ Previous: AIX Syslog where the hostname sit

The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for use with our enterprise monitoring applications and have found that our clustered servers are producing limited results when walking the MIB tree. Even using v1 or v2, same results.

Now I'm not sure that powerHA clustering has anything to do with it, or the fact that NET-SNMP was also installed, but without fail, the clustered servers produce only a little over 200 results when running:

clsnmp -h snmpUsr walk 1.3 | wc -l
236

My other systems, with the exact same OS version and configuration (minus powerHA and the pre-existence of NET-SNMP) produce thousands of results:

clsnmp -h snmpUsr walk 1.3 | wc -l
10254

I've validated SRC properties, mib files, conf files, etc and can find no real differences between the 2 servers exampled above - again other than powerHA and the pre-existence of NET-SNMP. The limited results are hindering SNMP monitoring obviously. Any thoughts on what I'm missing in regards to my limited results in the first example?

If any conf or log output helps, I'd be more than happy to oblige.

Thanks in advance.

↧