On other unix system i use enable ttya1 or vi inittab
and add getty line with port and serial.
Here i try
first serials
But no serial login appears.
Why?
---------- Post updated at 01:18 PM ---------- Previous update was at 11:26 AM ----------
Solution found on net
and enable login
and enable vty0
and edit inittab and set
in inittab
Works fine
and add getty line with port and serial.
Here i try
first serials
Code:
lsdev -Cc adapter | grep -i serial
vsa0 Disponibile Adattatore seriale virtuale LPAR
vsa1 Disponibile Adattatore seriale virtuale LPAR
penable vty0
init qWhy?
---------- Post updated at 01:18 PM ---------- Previous update was at 11:26 AM ----------
Solution found on net
Code:
chdev -l vty0 -a runmodes='hupcl,cread,brkint,icrnl,opost,tab3,onlcr,isig,icanon,echo,echoe,echok,echoctl,echoke,imaxbel,iexten,clocal' -a logmodes='hupcl,cread,echoe,cs8,clocal' -PCode:
chdev -l vty0 -a login=enableCode:
penable vty0Code:
vty0:2:respawn:/usr/sbin/getty /dev/vty0Works fine